RS232 Interface TPMS Solution Flow Through Tire Pressure Sensors Directly Fill Tires No Removal Required for buses,trucks,Supporting GPS,GPS Tracker and other RX TX Wires Telematics Integration
The Development Kit is supplied with a RS232 circuit board for connection to PC, and power supply, Details of the communication protocols are provided to enable it to be integrated with existing instrumentation, telematics or security applications.
Application
The system requires engineering expertise to programme it into the host system, so it is appropriate for equipment manufacturer applications. It is not supported for individual retail customers.
Wireless direct tire pressure gauge and monitoring system for large off-road vehicles such as mining & construction,earthmover,container & cargo handling equipment and transit systems.
The innovative Tire Pressure Monitoring System ensure and help decrease your downtime and reduce your operating costs by giving you accurate tire pressure data.It also help you improve fuel efficiency,increase tire life and keep you moving.
Key Specifications/Special Features
External Sensor Flow Through Type allowing you to inflate or deflate the tire without the action of sensor removal which is good for sensor lifespan,Super easy for sensor installation,no need to get support from tire repair shops,DIY
TPMS receiver communicated to dashboard via UART port of RS232
Communication protocol file will be offered
When more than 12 tires using two repeaters to insure good signal transmission quality
Convertible pressure unit, bar/psi
High/low pressure, slow/fast leakage, high temperature, low battery alarm, sensor failure alarm via GPS
Real-time tire data monitoring
Visual/audible alarm
Wireless transmission
Each TPMS Kit will include:
RS232 receiver: 1 pc and cable wires with definition
Repeaters: 1 pc
External Flow-Thru Sensor:6pcs(Price is based on a 6-wheel vehicle)
Flow Thru External Sensor Parameter
Battery Mode |
CR2032(210mAh) |
RF Frequency |
433.92 MHz±38 KHz |
Standby Current |
<0.7 uA |
Emission current |
<10 mA |
High frequency transmitting power |
<8 dbm(50Ω) |
High frequency modulation mode |
FSK |
Low frequency receiving frequency |
125 KHz±5 KHz |
Low frequency modulation mode |
ASK |
Pressure measurement range |
0-13 bar |
Pressure resolution |
2.75 KPa |
Pressure measurement accuracy |
±0.2 bar(0ºC~70ºC)/±0.3 bar(-20ºC~85ºC)/±0.48 bar(-40ºC~125ºC) |
Temperature measurement range |
-40ºC~125ºC |
Temperature resolution |
1ºC |
Temperature measurement accuracy |
±3ºC(0ºC~70ºC) |
Operating temperature range |
-40ºC~125ºC |
Temperature measurement range |
-40ºC~125ºC |
Temperature resolution |
1ºC |
Temperature measurement accuracy |
±3ºC(0ºC~70ºC) |
Storage temperature range |
-20ºC~85ºC(It is recommended to store at room temperature) |
Protection level |
IP67 |
Battery life |
More than 3 Years |
Sensor Weight |
42.5.±1g |



RS232 receiver:
Operating frequency: 433.92MHz ±68kHz
Operating voltage: 9-24V DC
Operating current: ≤20mA
Static current: ≤10mA
Operating temperature: -40 to 80°C
Communication: UART RS232
Baud rate: 19,200kbps
RF receiver sensitivity: ≥105dBm
Repeater(Signal Booster):
Operating frequency: 433.92MHz ±68kHz
Operating voltage: 9-30V DC
Operating current: ≤50mA
Static current: ≤10mA
Operating temperature: -40 to 80°C
Storage temperature: -40 to 125°C
Power supply: trunk power
RF transmitter power: <10dBm
RF receiver sensitivity: ≥105dBm
Default warning value:
Low pressure alarm threshold default: 7.5bar/109psi
High pressure alarm threshold default: 12.5bar/181psi
High temperature: 75°C